"Automatic Sleeve Shrink Wrapping Machine" is distinguishable from other types of shrink wrapping equipment in that the two ends of the package have an opening (often called "bulls eyes") such as commonly seen for water bottle packaging where the openings can act a handles.  In point of fact a sleeve wrapper is an excellent solution for bundling a wide variety of products and is often called a "bundler".

Our Sleeve Wrappers are available in a wide range of size capabilities and configurations from manual feed to fully automatic with collating. Speeds generally decrease between cased product

The Wraps  manual two reel sleeve wrapping machine is the lowest cost method of producing a shrink wrap for transit purposes. The system consists of the FE sleeve wrapper and the M25.40T shrink tunnel. Each machine uses a 13 amp single phase electricity supply making it an extremely mobile wrapping solution.

Shrink wrapping for transit purposes uses Polythene shrink film, the lowest cost shrink wrapping film available. One reel of film is mounted at a high level and the other is mounted at a low level. The two reels are joined by the sealing head, forming a curtain of film through which the product is pushed.

The product to be wrapped is manually pushed through the curtain of film, enveloping the product. The sealing jaw is then brought down by hand, cutting and sealing the film producing a loose sleeve of film around the product.

The next product to be wrapped then pushes the wrapped product into the heat shrink tunnel. In the tunnel the heat shrinks the film around the product leaving two open ends at the sides. The width of the film used compared to the width of the product determines how much of an open end is created.

The Automatic Sleeve Shrink Wrapping Machine is suitable for products up to 550mm wide and 400mm high. Speed of operation is up to 400 products per hour.