LS08-P312 Nozzle Pencil Filling Machine
1.The frame of the machine is made by SUS material and aluminum extrusion.
2.Interface makes parameters setting easy and it could memorize about 50sets filling data for recall.
3.Displaying on interface when error happened.
4.Filling by piston principle. Filling 12 pcs at the same time.
5.Filling and raise-down were controlled by Touch Screen and servomotor.
6.Piston circulates function to prevent the pearl settle and stuck when the machine at standby mold
7.10 liter double jacket(air tight) tank, the stirring speed and temperature are adjustable.
8.Maximum filling capacity is within 5 ml and the accuracy is within ±0.05㏄.
9.Temperatures of tank, valve and nozzle are controlled independently.
10.Tank timer can be pre-set up to 24 hours for pre-heating purpose.
-
Specification
-
Dimension:1150mm*800mm*1980mm
Electrical:220v/1ψ
Power:4.5kw
Operator:1人
Maximum Filling Capacity:5ml
Capacity:48pcs/min
-
Options
-
a. #AC02 -12-Nozzle Air Clean Mould Machine
1. by air blow principle.
2. Can do 12 holes at once.
b. Water Cooling Chiller
1. Cooling ability is 12,000 B.T.U, cooling temperature can reach 0。C
2. The cooling chiller structure is made by SUS material
c. Cooling board: For cooling down the finish product. The surface is made by duralumin.
d. Pre-heating boards: For heating mould before filling. Can set around 10 sets moulds.
-
Other 2
-
Target Product:Eyeliner Pencil, Automatic Pencil, Eyebrow Pencil, Lip Pencil, twist eyeliner pencil
|