|
Professional producer for BOPP Thermal Laminating Film.
Typical thickness: Glossy 25mic(12BOPP+13EVA) and Matte 27mic(15BOPP+12EVA). Single or double corona treatment.
20 days delivery of a 40feet container!
As an environmental friendly product, BOPP Thermal Laminating Film features as below:
#1 Healthy Lamination Process
It is non-hazardous to health and safe to use as being without toxic gases nor volatile content.
It is also safe during laminating process due to no solvent-based adhesive used.
#2 Easy Operation
It requires no action of using and blending the rubber, solvent, diluent and so on which is much easier during handling and cost-saved compared with the old way.
No special technique required, just laminate when the temperature gets adequate.
It is recommended to laminate the film with dry laminator. Just small adjustment to the machine needed if the film is laminated with wet laminator...
#3 High Efficiency and Energy-saving
Production cost is substantially reduced due to no wastage of film generated, no mixing of adhesive, no coating and drying processes, nor UV heating lamp required.
#4 Outstanding Function and Effect
It enhances the finished item's value through high transparency and super luster finish.
Preventing lamination from being pressed, bubbled and desquamated.
Protected from harmful substances and water-proof, ensuring a long life storage for the printings.
Particularly, matte BOPP Thermal Lamination Film is good for spot UV and hot stamping.
APPLIED TO
Books, Posters, Presentation Folders, Labels, Shopping Bag, POP Signs, Document, Book Covers, ID Cards, License, Passports, Antigraffiti, Boardmaking,
Write on/wipe off Calendars, Photographs, Albums ect.
Outside coating for wrapping box or bag for food, medicine, cosmetic, gift, liquor etc.
Drawing paper, documents, advertisement, digital printing, show board, etc.
PRODUCT TECHNICAL PARAMETER
THICKNESS (micron)
BOPP (BASE)
12 micron
12 micron
15 micron
15 micron
15 micron
EVA (GLUE)
8 micron
13 micron
10 micron
12 micron
13 micron
TOTAL
20 micron
25 micron
25 micron
27 micron
28 micron
TYPES
Glossy
√
√
√
√
√
Matte
√
√
√
Customized thickness-combination Available
Yield/Ration
Glossy
54.230m2/kg
44.215m2/kg
43.526m2/kg
40.212m2/kg
38.655m2/kg
Matte
44.843m2/kg
41.344m2/kg
37.174m2/kg
THICKNESS TOLERANCE
±1.5um
WIDTH RANGE per roll
300mm---1600mm (±5mm)
LENGTH RANGE per roll
2000m, 3000m, 4000m (±3%)
PAPER CORE (INNER DIA.)
25.4mm (1"); 76mm (3")
CONNECTOR/BONDING
≤ 1
CORONA TREATMENT SIDE
one side or both sides
SUR. TENSION (AFT. CORONA)
≥ 42dyne
APPLICATION MANUAL
COMPOUND TEMPERATURE
85--110C (185-230F)
COMPOUND PRESSURE
10--18mpa
COMPOUND SPEED
10--60m/min
APPLICATION GUIDANCE
* Better to be used in dry laminator. Small adjustment to the machine required when used in wet laminator.
* Normal process temperature is 90C-105C (203F - 221F), roller pressure and temperature vary from
different types of paper, ink and machines.
* When using the film for the first time or doing other treatment, please try a small volume before massive
laminating.
* Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture
or powder.
* Make sure to put the material in place with low temperature and dry.
* The following situation will affect the final quality of the film during lamination.
a. metal ink
b. ink containing too much wax, dried oil, adhesive, silicon additive and so on.
c. too much thick ink d. ink completely undried yet
e. too much humid paper sheet f. too much powder on the surface
|
