Polyethylene Anticorrosion Tape is made up of anticorrosion tape, protective tape, joint wrap tape, and primer. Polyethylene adhesive tape is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue. The product, safe and clean, performs well in insulation, anticorrosion, mechanical strength and anticollision, moreover it is of low water absorption, long service life, wide usage and convenient in application. It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation.
The specification of the tape consists of two layers, adhesive and film
Inner layer: butyl rubber
Outer layer: polyethylene
Thickness: 0.35 - 1.30mm
Width: 50-800mm
Length: 30 - 200m
Tapes specifications:
1) SXT-140 with 0.38mm / 15mil thickness and 50 - 800mm width
2) SXT-150 with 0.51mm / 20mil thickness and 50 - 800mm width
3) SXT-165 with 0.64mm / 25mil thickness and 50 - 800mm width
4) SXT-180 with 0.76mm / 30mil thickness and 50 - 800mm width
5) SXT-1100 with 1.02mm / 40mil thickness and 50 - 800mm width
6) SXT-1130 with 1.27mm / 50mil thickness and 50 - 800mm width
Packing: Carton
|