[Sell]
»Air Type Cap Elevator
2009-01-03 05:50:11
There is a detector switch in the cap sorter, which starts the cap elevator when the detector on the cap sorter gets a signal of there not being enough caps. The caps in the tank fall into the air by the function of the vibration motor and then pass though the air conveyor of the cap to the cap sorter. We can change the size of the tank inlet by the flashboard which can adjust the speed of cap falling.
|
[Sell]
»Filling Line for Liquid without Gas
2009-01-03 05:49:24
Capacity: 4,000 - 36,000 bottles/h DGY series 3-in-1 filling machine is the perfect combination of bottle washing machine, pressure filling machine and capping machine. As an efficient liquid packing machine, it has such features as follows: 1) Bottles are fed with air conveyer and transported by clapping the bottle neck and putting out with conveyor chain plates. It is easy to change the bottle type 2) Frequency conversional motor + PLC + touch screen with interaction of human-machine interface. Production speed, shift output and alarm in fault conditions are shown on the screen. The...
|
[Sell]
»Plastic bottle cap conveyor Packaging Equipment
2009-01-03 05:48:11
Our sorting method is by using of gravity. Closure is loaded randomly in the storage bin of the sorter. Closure shall be sorted in up side down or right side up at the outlet of the sorter.
Delicate design with very simple structure, very easy in maintenance.
This sorter has combined elevator and sorter in one Packaging Equipment.
For sorting different size of the closure, the divider on the uplift conveyor does not need to be changed.
This machine is fully constructed with stainless steel.
We can base on customer special requirement in designing the machine to customers spe...
|
[Sell]
»Automatic Cap-Feeding Machine
2009-01-03 05:47:08
To meet the reqirements of high production capacity for mineral an purified water bottle line, we designed this machines to feed the caps continuously
|
[Sell]
»Ladder Style Cap Elevator
2009-01-03 05:46:00
TLP-I series ladder-style cap elevator main components:
1) Capping hopper
2) Elevator
3) Capping-out device
|
[Sell]
»Pasteurizer-Warmer-Cooler
2009-01-03 05:44:06
HY board type super high temperature sterilization machine set, used for sterilization
of sanitary / hygiene industries.
|
[Sell]
»D-209 UV Sterilizer (small),sterilizing machine,beauty equipment
2009-01-03 05:42:36
UV Sterilizer (small),sterilizing machine,beauty equipment
N.W/:5.1kgs
G.W/:6.4kgs
Packing Size :42*26.5*28CM
|
[Sell]
»Boil Bottle Sterilizing Machine
2009-01-03 05:41:30
USAGE AND BRIEF INTRODUCTION
The machine is applied in sterilizing and drying oral liquids, vials, ampoules and other glass bottles. It adopts infrared quartz heating, and 100-stage cleaning cooling equipment. It is characterized of adoption of entrance and exit cleaning close equipment and temperature setting display for automatic control and delivering speed of chains and mesh belt for stepless speed changing. The machine and bottle touching part are all made of stainless steel. The machine is used individually or combined into an assembly line and meets the requirements of GMP.
...
|
[Sell]
»sterilizing machine
2009-01-03 05:37:52
Application:
This machine is mainly used for canned food (meat, fowl, fish, egg, and vegetable canned food) and protein beverages which needs to be sterilized by high temperature(for example: milk, soy-milk, apricot, coconut milk, peanut milk, walnut milk,and others). The packing material could be hard can (tinplate, glass bottle can HDPE), steam cooked bag, especially is suitable for soft can, such as ham sausage, fried chicken in steam cooked bag, shredded chicken and milk.
Features:
This machine is a full-automatic sterilizing machine ...
|
[Sell]
»UHT Sterilizing machine
2009-01-03 05:36:39
This sterilizing machine is widely used for sterilizing milk, juices, beverages, liquor, fruit, medicine and other fluid material. It is a good sterilizing equipment, especially if it used with a high-pressure homogenization equipment.
|
[Sell]
»Surgeons Cap
2009-01-03 05:34:43
Non Woven : STERILE : Made on ultrasonic machine.
|
[Sell]
»Powder Filling Machine
2009-01-03 05:33:45
Filling Size: -4mg to 6gm The incoming dry container (Sterilized and Siliconised) are fed through the unscrambler and suitably guided on the moving slat conveyor belt at the required speed for the correct placement below the powder wheel. All the parts and assemblies coming in contact with the powder are made Of S. S.-316 and easily removable for mandatory autoclaving / sterilisation. Multiple dosing of Injectablepowder or change-over of container size And different fill size is possible by just changing the vial separator or the size of the Piston respectively. Total powder filling and ...
|
[Sell]
»Ampoule Sterilizing and Depyrogenating Tunnel
2009-01-03 05:32:09
STERILISING & DEPYROGENETING TUNNELS Leading edge technology in compliance in cGMP design criteria perfect understanding of the needs of our customer, blossoms in to a product of high quality and performance from engineering and manufacturing to commissioning at customer plants.Effective Sterilization and Depyrogenation ProcessDepyrogenation tunnels designed to sterilize depyrogenate glass containers with a continuous process maintaining an ISO 5 environment along the hole length and width of the conveyor belt complying with ISO 14644-1 requirements.Design to allow higher outputs in a ...
|
[Sell]
»O3 Washing & Sterilizing Machine
2009-01-03 05:31:16
Rated Voltage 220V 5% Rated Frequency 50Hz Rated Power 20W Applicable Working Pressure 0.05~0.4MPa Relative Humidity 90% Power Supply 1/2 Inch.
|
[Sell]
»industrial microwave belt type drying and sterilization machine
2009-01-03 05:30:31
Speed of heating, better efficiency, saving in space and manpower.
Ease of operation, instantaneous ON and OFF operations.
Ease of adaptation to existing on line operations, possible combinations with other thermal process.
No energy loss radiation, improved efficiency and working conditions, possibility of eliminating the need for temperature control of the equipment.
Better thermal efficiency compared with traditional process.
Improved product quality.
|
