Characteristics:
* In company with standard IEC motor flanges. Outdoor, anti-explosion can be integrated.
* Capable to work with speed adjusting machine or frequency converter to adjust its speed
* Utilize spiral gear for speed reduction, hermetic gearbox with oil lubrication.
* Speed reducer and rack are assembled with flexible coupling, which is easy to dismantle and replace.
* The rack applies fully hermetic structure, which is water proof and is capable to operate in the poor outdoor environment.

Dimensions table Dimension ： mm Motor rpm Type A B E F G Z f I D S L 1 HP 180.360 H35 242 458 255 280 18 15 110 235 300 35 1500 1 HP 120.90.70.60 H35 242 458 255 280 18 15 110 235 400 35 1500 1 HP 45.35.30 H35 242 482 255 280 18 15 110 235 500 35 1500 1 HP 25.22.20 H40 242 591 290 320 20 15 120 235 600 40 2000 1 HP 18.15.12 H40 242 591 290 320 20 15 120 235 700 40 2000 2 HP 180.360 H35 322 458 255 280 18 15 110 235 350 35 1500 2 HP 120.90.70.60 H40 322 569 290 320 20 15 120 235 450 40 2000 2 HP 45.35.30 H40 322 591 290 320 20 15 120 235 550 40 2000 2 HP 25.22.20 H45 322 652 320 350 25 17 130 280 650 45 2500 2 HP 18.15.12 H45 322 652 320 350 25 17 130 280 750 45 2500 3 HP 180.360 H40 315 569 290 320 20 15 120 235 380 40 2200 3 HP 120.90.70.60 H45 315 628 320 350 25 17 130 280 550 45 2500 3 HP 45.35.30 H45 315 652 320 350 25 17 130 280 700 45 2800 3 HP 25.22.20 H50 315 716 380 415 30 17 150 280 800 50 3000 3 HP 18.15.12 H50 315 716 380 415 30 17 150 280 900 50 3000 5 HP 180.360 H45 371 628 320 350 25 17 130 280 400 45 2500 5 HP 120.90.70.60 H50 371 691 380 415 30 17 150 280 600 50 3000 5 HP 45.35.30 H50 371 716 380 415 30 17 150 280 750 50 3200 5 HP 25.22.20 H60 371 780 400 440 30 20 160 280 850 60 3500 5 HP 18.15.12 H60 371 780 400 440 30 20 160 280 1000 60 3800 7.5 HP 180.360 H50 374 691 380 415 30 17 150 280 500 50 3000 7.5 HP 120.90.70.60 H60 374 758 400 440 30 20 160 280 650 60 3500 7.5 HP 45.35.30 H60 374 780 400 440 30 20 160 280 850 60 3800 7.5 HP 25.22.20 H70 374 870 450 500 30 25 190 300 950 70 3800 7.5 HP 18.15.12 H70 374 870 450 500 30 25 190 300 1200 70 3800 10 HP 180.360 H60 412 758 400 440 30 20 160 280 600 60 3500 10 HP 120.90.70.60 H70 412 841 450 500 30 25 190 300 850 70 3800 10 HP 45.35.30 H70 412 870 450 500 30 25 190 300 1200 70 4000 15 HP 180.360 H70 498 841 450 500 30 25 190 300 800 70 4000

1. The rotating speeds on the table are based on 60Hz. Please multiple by 0.83 if 50Hz is used.。 2. For other power levels, rotating speeds, please contact our sales department for details. 3. Blade curvature (D), shaft diameter (S), shaft length (L) are all reference dimensions. Actual selection should depend on the conditions including dimensions of the tank, stirring objective, rotating speed, viscosity, blade configuration etc. 4. When operating at a high speed or in a deeper tank of a large capacity, please add fixing rings and shaft seals in water for protection. 5. The portions of the shaft and blades that directly contact the liquid are made of SUS304. If other specific material or anti-acid/alkali coating and painting are needed, please contact our company for details.