EZN

The only electric 3-finger centric gripper with multi-tooth guidance.

Description
Servo-electric 3-finger centric gripper with high gripping force and high maximum moment due to multi-tooth guidance
 

Field of application
Optimal standard solution for many areas of application; flexible use due to controllable gripping force, position, and speed
 

Advantages – Your benefits
Drive design of servomotor 
for flexible use
With external electronics 
for simple integration into existing control concepts via PROFIBUS-DP, or CAN
Pre-positioning capability 
to reduce cycle times through a short working stroke
Robust multi-tooth guidance 
for precise handling
High maximum moments possible 
suitable for using long gripper fingers
Fastening at one gripper side in two screw directions 
for universal and flexible gripper assembly
 

Options and special information
Control via external ECM controller 
The electrical control of the gripper takes place via the separately available ECM controller. Connection of the controller to the higher level servo controlled concept can take place via PROFIBUS or CAN. Both communication interfaces ensure simple integration into the higher level control system and enable the design of industrial bus topologies.
Plug version EZN-S 
Plug version EZN-S is available for the ECM controller in addition to the standard variant with 5 m attached connection cable. The gripper has a 30 cm cable and stepped Y-plug in this version. Drag-chain-compatible or robot-compatible power and sensor cables have to be ordered separately.
Dust-tight version SD 
absolutely dust-tight, increased degree of protection against the penetration of materials.