Machine Features
1.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
2.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
3. Low rejection rate: less than 0.2 percent.
4. Stable performance with advanced PLC.
5. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
6. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
7. Two ways of operating: automatic and manual.
8. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
9. Conveying preforms automatically with conveyor.
10.Strong clamping force with high pressure and double crank links to lock the mold.
11. Low rejection rate: less than 0.2 percent.
12.Contamination is avoided for the bottle body.
13. Easy installation and starting.
14. Ideal effect of the chilling with the chilling system.
15.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
16.It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics,and other packing containers, which is made of plastic of crystalline type, such as PET.
Water bottles 500 CC theory output bottle line configuration table
Specification
CY-II-A2400
Theoretical output
2400
Max. capacity
0.8L
Prefonm neck(inner dia.)
18~38MM
Bottle diameter(max.)
86MM
Bottle height(max)
265MM
Number of cavity
2
Number of lamp
16
Max.heating power
15KW
Installation power
32KW
Service power
8KW(500cc18g)
Operatating low pressure
0.7Mpa
Low pressure consuming
1200L/min
Blowing pressure
3.5Mpa
High pressure consuming
1200L/min
Operating pressure
0.3-0.5Mpa
Temperature
10
Machine dimension
3.1×2.4×2.2
Machine weight
1.5T
|