1. Description: Under the authorized patents approval in China & Germany of Original Flexo Ink-offering system & Offset Rubber Fabric printing technology, absorbed some techniques from Europe & America.Production process of the machine: Unwing → Printing → Dryer→Winding2. With below characteristics:a) Change printing or cutting length: No need to change printing rollers or gears in different size printing, directly set on Human-Machine-Interface (HMI) touching monitor, length range 400-1200mm at will.b)Accuracy color register: The thickness or the tension of rolled fabrics and the speed of printing never affects the printing accuracy. Color register allowance: less than or equal to +/-0.2mm.c) One step two sides 8 colors (Front side: 5 colors + Back side: 3 colors) printing with accurate & sharp printing result. Immediately printing once machine turned on and Pre-color-register is unnecessary.d) Referring to Germany W&H AG’s technique on Flexo Printing Machine, printing unit adopts bevel gear driven, the fine turning device for horizontal & vertical registering achieves online (in machine running) quick color register adjusting in quantitative and positioning at one time.3. Specification:1) Applicant: tubular woven fabric, laminated woven fabric, woven combining fabric.2) Max. fabric width: 800mm3) Max. printing width: 720mm4) Printing length: 300-930mm (Omnipotent Size,No need to change printing rollers or gears)5) Printing production speed: 80pcs/min. (Take bag length as 800mm) 6) Auto EPC travel: +/-100mm7)Printing colors: two sides 8 colors (Front side: 5 colors + Back side:3 colors)(5+3, 5+2, 5+1, 4+3, 4+2……)8)Printing cylinder correction: vertical range at 7.5mm, horizontal range at 10mm, online adjustable (in machine running status)
|