Product Description | |||||||||||||||||||||||||||||
Name:PSA Nitrogen Generators | |||||||||||||||||||||||||||||
Brand:Infilled | |||||||||||||||||||||||||||||
Specs:Unfilled | |||||||||||||||||||||||||||||
Price:/ | |||||||||||||||||||||||||||||
This simple, turnkey Pressure Swing Adsorption (PSA) type Nitrogen Generator provides a cost-effective means for on-site gas generation. It is based on using the latest PSA technology and utilizes Carbon Molecular Sieve (CMS) to separate nitrogen from the other gases contained in air. The Nitrogen Generator uses two beds of CMS to separate compressed air into a high-pressure nitrogen product stream and low-pressure oxygen enriched waste stream. Typical feed air pressure is 110 psig/7.6 barg. Typical nitrogen product purity for our systems is 99%. Product flow rate for the same system will be higher with better nitrogen recovery if a higher oxygen content can be accepted in the nitrogen product. Systems are available with a product purity up to 99.999% nitrogen (10 ppmv oxygen).
(Consult Holtec for other purities and flow rates for our smaller and larger systems. ranging from 0.5 - 5,000+ Nm3/h)
|
|||||||||||||||||||||||||||||
Other Products: Membrane Nitrogen Generators PSA Nitrogen Generators |
Relevant Products |
|
Contact | ||||||||||||||||
|
Tel:886-2-28941823 Fax:886-2-28941837 E-mail:viya@packsourcing.com
Copyright Notice © 2015 New Insight Publishing Ltd.. All rights reserved.
Powered by Packsourcing