1.
|
The housing and surface are covered with stainless steel 304. All contact parts of medical powders are made from a corrosion resistant stainless steel 316. |
2.
|
Parts are made by CNC computer machine. All parts are standardized and easy to substitute. |
3.
|
Capable of filling 6 capsules at a time with operation from 10 stations. Accurate operation for orientation, opening, filling, joining and ejecting of the capsules. |
4.
|
Compulsory spiral feeding in the powder hopper to ensure powder feeding and filling. |
5.
|
Dual capsule-opening design to ensure all capsules are opened. |
6.
|
Electrical impact protection device to prevent any further damage. The machine will stop automatically in the event of collision. |
7.
|
Safety Sensing System to shut the machine down automatically in the event of problems when no capsules, no powder, door is opened, and abnormal load for the machine are detected. |
8.
|
Automatic vacuum removal of the air in the dosing tube to give more accurate weitht of the filled capsules. |
9.
|
Exclusive dosing tube system, temperature of the powder will not rise during the filling process. |
10.
|
Adjustable compression piston in dosing trube to adjust the powder volume without change parts. |
11.
|
Easy to change the molds without alignment. A person without experience can change the molds within 30 minutes. |