TS-2435-VB Coffee Beans Filling & Packaging Machine
APPLICABLE PRODUCTS:
-
This machine mainly designed for coffee
-
Range of filling and metering: 200 - 1000g.
|
FEATURES:
-
The TS-2435-VB automatic bag forming electronic weighing filling packaging machine is suitable for filling packaging of granular products.
-
Easy to set filling weight.
-
Filling weight accuracy is controlled within ±1%.
-
The weighing unit features automatic reset.
-
Graduation of load cell is 1g.
-
Double vibration metering design.
-
The machine is designed with an air operated sealing mechanism, ensuring smooth appearance of product without pin-hole problem. No material exists at sealing position that assures superior tightness of sealing.
-
Printing points photoelectric sensor is easy to adjust to eliminate waste of packaging film. Simply inputs packaging length in case of no printing points photoelectric sensor.
-
Minimum sealing temperature variation. Employ PID calculation to maintain temperature tolerance within ±2˚C.
-
According to different kinds of products and filling weights, memory modules can be input several sets for convenient management.
-
The transmission system of the ackaging machine is driven by Japan Mitsubishi servo motor for high accuracy.
-
Automatic Air Escape Valve Fitting Mechanism
-
Vacuum pump in German brand.
|
|
|
‧Automatic Air
Escape Valve
Fitting Mechanism |
‧Vacuum Belt
Paper Pulling
and Gusset
Device |
|
|
-
Vacuum Belt Paper Pulling and Gusset Device.
-
The machine is available to be connected with initial material system.
-
The control system employs a touch-sensing screen for operational convenience.
-
All air cylinders employ Japan (SMC) standards for dependable quality.
-
The controller provides a self-diagnostic function. In case any machine trouble occurs, such as no packaging film, no color tape, photocell sensor error, excessive or under sealing temperature or air pressure failure etc, the machine will stop automatically. The screen will display problem points and trouble-shooting instructions.
-
The machine is available to equip with a nitrogen gas filling device, that allows the oxygen existing in product to be controlled within under 2%.
-
The machine is available to perform perforating packaging function (Two or three packages perforating).
|
|
|
Specifications :
Machine Size |
L: 1250mm / W: 1650mm / H: 3200mm |
Machine Weight |
850 kg |
Range of Packaging Film Sizes
(Product Sizes) |
L: 160 - 240mm; W: 180 - 350mm |
Packaging Material |
Laminated aluminum foil or PET material |
Packaging Method |
3-side back sealing |
Packaging Speed |
Double Scales : 12-18 bags/min
Three Scales : 18-24 bags/min
Four Scales : 24-32 bags/min |
Power Required |
220V, 3Ø, 7.5HP, 50/60Hz |
Air Pressure |
6 - 8kg/cm2 |
|
|