SellHP103P Piston Pump Applicator
FEATURES
-
Integrated micro-processor control system.
-
Individual temperature control with digital controller for melting tank and dispensing nozzle.
-
Melting tank and dispensing nozzle could be heated orderly to avoid dispensing nozzle heating overtime and to reduce carbonization of hot melt adhesive (HMA).
-
Weekly timer for setting the time to turn on and off machine automatically by requirements.
-
The function of keeping warm as a "Stand By" status to reduce carbonization of HMA and to conform to friendly environment.
-
Malfunction warning.
-
Constant flow by precision piston pump.
-
Filters are installed inside manifold and dispensing nozzle, reducing maintenance and glue path block.
-
50% improvement on energy efficiency compared with traditional models.
-
With plastic cover for low surface temperature, fine ability to keep-warmth, light weight, easier maintenance service.
SPECIFICATIONS
SPEC |
UNIT |
HP103P |
Tank Capacity |
Liter |
3 |
Max. Melting Rate |
Kg/HR |
5 |
Max. Operation Temperature |
°C |
200 |
Viscosity |
CPS |
8000 |
Gun |
Set |
1 |
Air Pressure Requirement |
Kg/cm2 |
4 |
Dimensions |
mm |
514 × 507 × 485 |
Weight |
Kg |
25 |
Melting Tank Power |
Watt |
1300 |
Power Requirement |
|
220V AC,5.9A,50/60Hz, 1Φ |
|
|
|
|